Horizontal load on HCS

Here you find information and developement about input of loads

Moderator: StruSoft Fredrik L

konstruktor
Novice
Posts: 2
Joined: 17 Feb 2016, 14:26

Horizontal load on HCS

Postby konstruktor » 25 Oct 2016, 12:25

Hello,

Is it possible to calculate following connection in PRE-Stress? See pictures below.

Cantilever balcony attached to HCS through steel rods, so HCS has horizontal load.
2016-10-25 12_52_07-Settings (2).png
2016-10-25 12_52_07-Settings (2).png (73.06 KiB) Viewed 564 times


Need to add horizontal load or moment on slab. Can I somehow simulate this connection in PRE-Stress to check capacity for HCS?

User avatar
StruSoft Fredrik L
StruSoft Employee
Posts: 38
Joined: 20 Nov 2015, 13:03
Location: Gothenburg, Sweden
Contact:

Re: Horizontal load on HCS

Postby StruSoft Fredrik L » 26 Oct 2016, 10:55

Hello!

It is currently not possible to calculate torsion or horisontal forces according to your picture.

we are currently working on adding torsion into the program, and it is expected during Q1, 2017
--------------------------------
Fredrik Lagerström
Technical Support and Developement
StruSoft AB

Telephone: +46 (0)40 530 100
Mobile: +46 (0)734 20 20 74
Skype: StruSoft Fredrik Lagerström
LinkedIn: Fredrik Lagerström


Return to “Loads”

Who is online

Users browsing this forum: No registered users and 1 guest